The center machining lathe uses bar-like raw materials to process small parts, and the batches are large, many of which are formed at one time. As long as it involves the processing of bars, the diameter is within 42mm, and the processing of the centering machine with the automatic feeder can obtain huge advantages. After the centering machine is combined with the automatic feeder, it is a small independent production line. have huge advantages.
The main difference between the centering machine processing and the cutting machine is that the material of the laser cutting service is moving, and the cutting machine is the knife moving. Mainly used for holding small parts and mass processing. Generally, the feeder passes the bar material through the through hole of the main shaft, and the spring chuck is automatically clamped. If the part is overhanging, it needs to be equipped with a long material supporter or a double-spindle centering machine, and the back shaft is used to support the material. If the tail needs to be processed, a second spindle is required. The huge advantage of the centering machine is that it supports bars of heterosexual raw materials such as square and hexagon, and the spindle has an indexing and positioning function. The centering machine is mainly limited by the diameter of the material. Generally, a larger type of swiss turning can only process parts with a diameter of 42 mm. As long as it is a part that can be processed by a centering machine, its machining accuracy, processing speed, and cutting machine are difficult to compare!
The main advantages are as follows:
1. One clamping and non-stop spindle can turn parts with a length of more than 200mm, if you are turning a 5mm length
The parts can be driven by the difference between center machining and knife machining, but the car can produce 20~30 parts in one go, and only need to stop and feed
2. The centering lathe is always close to the material when cutting, so the rigidity is very good. After you think about your lathe clamping the parts,
If the tool sticks to the clamping position for a few mm to turn, how rigid will it be?
3. The centering machine is a combination of cnc turning and milling, and the complexity of one-time processing and forming is not comparable to that of the old-fashioned automatic car, which is commonly known as the cam machine lathe. And now the more advanced CNC automatic lathe, we call it a center lathe or a slitting lathe. Mainly, the spindle Z moves forward and backward, and the knife can move X and Y, which can realize three-dimensional processing and one-time forming.